Tattoo Size Calculator
Your size
3 × 3 in (7.6 × 7.6 cm)
Small, 2-4 in
Size comparison
about 0.9 credit cards wide
Show at true size on this screen
The on-screen preview is not to scale. Calibrate it with a real bank card.
Resize the outline until all four edges match your real bank card.
Pick a size in inches or centimeters and see exactly how big your tattoo will be: next to familiar objects, at true size on your screen, or printed on paper you can hold against your skin. Then preview it on a 3D body or estimate the price.
How tattoo sizes are measured
Artists usually describe a tattoo by the width and height of the design’s outer edge, for example 3 × 2 inches. In the US, sizes are normally given in inches, so this calculator shows centimeters alongside. The size is the design itself, not the skin around it, and a curved area can make a design look a little smaller than it measures on paper.
Common tattoo sizes at a glance
These are the sizes people ask about most. Tap one in the calculator above to see it next to real objects.
| Size | Centimeters | Size group | Compared with |
|---|---|---|---|
| 1 × 1 in | 2.5 × 2.5 cm | Tiny, under 2 in | About the size of a US quarter (0.955 in across) |
| 2 × 2 in | 5.1 × 5.1 cm | Small, 2-4 in | Slightly less than the short side of a bank card (2.13 in) |
| 3 × 3 in | 7.6 × 7.6 cm | Small, 2-4 in | A little shorter than the long side of a bank card (3.37 in) |
| 4 × 4 in | 10.2 × 10.2 cm | Medium, 4-6 in | About two-thirds the length of a US $1 bill (6.14 in) |
| 5 × 5 in | 12.7 × 12.7 cm | Medium, 4-6 in | About four-fifths the length of a US $1 bill |
| 6 × 6 in | 15.2 × 15.2 cm | Large, 6-10 in | Almost the full length of a US $1 bill |
Tattoo size guide: tiny to large
This guide uses the same size groups as our tattoo cost calculator, measured by the longest side. They are a common way to talk about size, not fixed rules, and many shops price large pieces by the hour instead.
| Tiny, under 2 in |
|---|
| Small, 2-4 in |
| Medium, 4-6 in |
| Large, 6-10 in |
Measure the space before you book
Use a soft tape measure to check the space you have in mind, and measure along the skin rather than in a straight line across a curve. Enter the width and height above to see the largest size that fits with your design’s proportions, then preview that size on a 3D body to see how it wraps around an arm or leg.
Why the smallest size depends on the design
There is no single minimum size. A simple outline can be small, while lettering, fine detail and shading need more room so lines don’t blur together as the tattoo ages. Ask your artist what size keeps your design clear, and browse small tattoo ideas or fine line designs for examples with suggested sizes.
Small tattoo ideas · Fine line tattoo
Questions
How big is a 1 × 1 inch tattoo?
A 1 × 1 inch tattoo is about 2.5 cm on each side, close to the size of a US quarter. At this size, simple outlines work best; ask your artist how much detail will stay clear.
How big is a 2 × 2 inch tattoo?
A 2 × 2 inch tattoo is about 5.1 cm on each side, slightly less than the short side of a bank card (2.13 inches). It is often chosen for a simple symbol or a short word.
How big is a 3 × 3 inch tattoo?
A 3 × 3 inch tattoo is about 7.6 cm on each side. That is a little shorter than the long side of a bank card (3.37 inches) and taller than its short side (2.13 inches).
How big is a 4 × 4 inch tattoo?
A 4 × 4 inch tattoo is about 10.2 cm on each side, roughly two-thirds the length of a US dollar bill. It has room for more detail than a small piece.
What size is a small tattoo?
In this guide, a small tattoo is 2 to 4 inches on its longest side, and anything under 2 inches is tiny. Shops use different words, so compare actual measurements with your artist.
How do I measure where my tattoo will go?
Use a soft tape measure along the skin, note the width and height of the space, and enter them in the calculator to see the largest design that fits.
Will my tattoo look smaller on a curved area?
It can. On an arm or leg, part of the design wraps around the side, so less of it faces you at once. Preview the size on a 3D body to see the effect.
Is the printout exactly to scale?
Print at 100% or Actual size, not Fit to page, then check the bank card outline against a real card. If they match, the outline is to scale.
Reference dimensions
- Bank card: 85.6 × 53.98 mm — ISO/IEC 7810 ID-1 card size
- US quarter: 24.26 × 24.26 mm — U.S. Mint coin specifications
- US $1 bill: 156 × 66.3 mm — U.S. Currency Education Program (6.14 × 2.61 in)
Design reference to discuss with your artist — not a final tattoo or healed result.